ASM STEEL BAND FAMILY TH
The P 250 TH steel band point hoist range is a true ASM classic. The hoists are characterized by three different equipment variants for different applications. The basic models are equipped with a special ASM gearbox, which does not require brakes. The hoist features a gearbox with a safety catch, which sets a superior safety standard in the market.
The P 250 TH safely moves loads of up to 250 kg with a speed of 0.2 m/s or 1.2 m/s. This P 250 TH hoist uses a single steel band of 45 x 0,4 mm as a load bearing line.
The perfectly balanced hoist is integrated in a yoke and therefore an has a swivel function. This allows diagonal hoisting to all sides regardless of the attached load.
All P 250 TH point hoists are designed in strict conformity with the DGUV V17 and EN 17206 regulations and are designed to allow performing flying of people.
All P 250 TH point hoists are made to be SIL 3 ready and can be coupled with a SIL3 control, such as ASM GENESIS SIL3 control.
Example of P 250 TH-S-SIL3
STANDARD FEATURES & BENEFITS
- Mount under an I-beam, or vertically on a truss, or within a truss, trolley mount above a grid, self-climbing hoist
- Durable load bearing line, steel band (45 x 0,4 mm)
- Silent and accurate operation
- The hoist features gearboxes with a safety catch, which sets a superior safety standard in the market
- Allows diagonal hoisting to all sides regardless of the attached load
- Load carrying device by means of tear proof tested eyelet
- Removable eyelet allows the steel band passing through most grids
- Optimal capacity to own weight ratio
- Due to its light weighted design, it is ideal for mobile applications
THE P 250 TH POINT HOIST RANGE
The P 250 TH models with speed 0.2 m/s are equipped as standard with a self-locking gear and an extra safety catch integrated in the gearbox. The equipment with a self-locking gear allows the operation without brakes. It ensures a smooth deceleration of the load of 250 kg even in the event of a power failure. Since brakes are not required, the hoist requires less maintenance.
The control possibilities reach from a 24V, third party control to a full synchronous ASM GENESIS SIL3 control.
The P 250 TH models with speed 1.2 m/s are equipped as standard with an extra safety catch integrated in the gearbox and two silent theatre brakes.
The hoist allows the highest available performance for scenic applications, which means operating in high speed while positioning exactly.
The high duty cycle makes the hoists especially suitable for performances in scenic applications.
The high-end version of the TH family is characterized by a high-performance servo motor (synchronous), which allows loads to be moved smoothly and quietly over a very long time period.
The control possibilities allow a full synchronous group drive with ASM GENESIS SIL3 control or a third-party control.
P 250 |
|||
|---|---|---|---|
TH 0,2 |
TH 1,2 |
TH 1,2 Servo |
|
| Max. (variable) speed in m/s | 0,2 | 1,2 | |
| Hoist Capacity in kg on Steel Band | 250 | ||
| Number of Steel Band | 1 | ||
| Load Bearing Line | 45 x 0,4 mm | ||
| Max. Travel in m | 20 | 24 | |
| Safety System | self locking-gear | two brakes | |
| Motor Type | asynchronous | servo | |
| Motor Performance in kW | 1,5 | 3 | 3,8 |