ASM CLUSTER CHAIN
The Cluster Hoist Chain has a double load bearing line made of 5 x 15 mm chain each.
In total it lifts loads up to 500 kg over a lifting distance of up to 20 m at a speed of up to 0,05 m/s. The double load bearing line ensures that the attached line arrays cannot tilt. Thanks to flexible mounting options, it can be attached to a truss, existing steel support structures or to a ceiling.
The resulting dynamic forces are also considerably low in the event of an incident due to the dynamic self-locking gear, as the load is brought to a stop gently and reliably in any case.
The Cluster Hoist Chain with speed 0,05 m/s is equipped as standard with a dynamic self-locking gear and an extra safety catch, allowing operation without brakes. It ensures a smooth deceleration of the load of 500 kg even in the event of a power failure. Since brakes are not required, the hoist requires less maintenance.
The control possibilities reach from a 24V, third party control to a full synchronous ASM GENESIS SIL3 control.
CLUSTER HOIST CHAIN RANGE
| CLUSTER CHAIN | |
|---|---|
| Regulation | DGUV V17, EN 17206 |
| Safety Standard |
up to SIL3 |
| Max. (variable) Speed |
0,05 m/s |
| Hoist Capacity |
500 kg |
| Load Bearing Line |
2 x chain
5 x 15 mm |
| Motor Performance |
0,55 kW |
STANDARD FEATURES & BENEFITS
- Max travel : two standard travels 12 m or 24 m
- Load capacity : up to 500 kg
- Equipped with 0,55 kW motor
- Equipped with two load bearing lines with stable travel without twisting of suspended load
- Equipped with dynamic self-locking gear for gentle braking
- Equipped with an extra safety catch
- Less maintenance required, as the hoist does not have brakes
- Smooth deceleration of the load even in the event of a power failure
- Suitable for truss installation, mounting on existing steel structures or to a ceiling
- Low mounting height
- Equipped with two compact chain bags ensuring that chains do not get tangled
- Easily installed in little storage space (no space loss)
- Includes load measurement
CLUSTER HOIST CHAIN RANGE
| CLUSTER CHAIN | |
|---|---|
| Regulation | DGUV V17, EN 17206 |
| Safety Standard |
up to SIL3 |
| Max. (variable) Speed |
0,05 m/s |
| Hoist Capacity |
500 kg |
| Load Bearing Line |
2 x chain
5 x 15 mm |
| Motor Performance |
0,55 kW |
STANDARD FEATURES & BENEFITS
- Max travel : two standard travels 12 m or 24 m
- Load capacity : up to 500 kg
- Equipped with 0,55 kW motor
- Equipped with two load bearing lines with stable travel without twisting of suspended load
- Equipped with self-locking gear for gentle braking
- Equipped with an extra safety catch
- Less maintenance required, as the hoist does not have brakes
- Smooth deceleration of the load even in the event of a power failure
- Suitable for truss installation, mounting on existing steel structures or to a ceiling
- Low mounting height
- 12 m version equipped with two compact chain bags ensuring that chains do not get tangled
- Easily installed in little storage space (no space loss)
- Includes load measurement