ASM CLUSTER BAND
The cluster hoist band has a double load bearing line made of 30 x 0,4 mm steel band.
In total it lifts loads up to 200 kg over a maximum travel distance of 12 m at a speed of up to 6 m/min. The double load bearing line ensures that the attached line arrays cannot tilt.
Thanks to flexible mounting options, it is suitable for truss installation, mounting on existing steel structures or to a ceiling.
Due to the dynamic self-locking gearbox, the dynamic forces even in the event of a power failure are considerably low and the load is brought to a safe stop gently and reliably in all scenarios.
The cluster hoist band with speed 0,1 m/s is equipped as standard with a dynamic self-locking gear and an extra safety catch. The equipment allows for operation without brakes. Since brakes are not required, the hoist requires less maintenance.
The control possibilities reach from a 24V, third party control to a full synchronous ASM GENESIS SIL3 control.
CLUSTER BAND RANGE
| CLUSTER BAND | |
|---|---|
| Regulation | DGUV V17/18, EN 17206 |
| Safety Standard |
up to SIL3 |
| Max. (variable) Speed |
0,1 m/s |
| Hoist Capacity |
200 kg |
| Load Bearing Line |
2 x steel band
30 x 0,4 mm |
| Motor Performance |
0,55 kW |
STANDARD FEATURES & BENEFITS
- Max travel : 12 m
- Load capacity : up to 200 kg
- Equipped with 0,55 kW motor
- Equipped as standard with two steel bands as durable load bearing line : stable travel without twisting of suspended load
- Equipped with dynamic self-locking gear for gentle braking
- Equipped with an extra safety catch
- Less maintenance required, as the hoist does not have brakes
- Smooth deceleration of the load even in the event of a power failure
- Suitable for truss installation, mounting on existing steel structures or to a ceiling
- Low mounting height
- Easily installed in little storage space (no space loss)
- Silent and accurate operation
- Includes load measurement
CLUSTER HOIST BAND RANGE
| CLUSTER BAND | |
|---|---|
| Regulation | DGUV V17, EN 17206 |
| Safety Standard |
up to SIL3 |
| Max. (variable) Speed |
0,1 m/s |
| Hoist Capacity |
200 kg |
| Load Bearing Line |
2 x steel band
30 x 0,4 mm |
| Motor Performance |
0,55 kW |
STANDARD FEATURES & BENEFITS
- Max travel : 12 m
- Load capacity : up to 200 kg
- Equipped with 0,55 kW motor
- Equipped as standard with two steel bands as durable load bearing line : stable travel without twisting of suspended load
- Equipped with dynamic self-locking gear for gentle braking
- Equipped with an extra safety catch
- Less maintenance required, as the hoist does not have brakes
- Smooth deceleration of the load even in the event of a power failure
- Suitable for truss installation, mounting on existing steel structures or to a ceiling
- Low mounting height
- Easily installed in little storage space (no space loss)
- Silent and accurate operation
- Includes load measurement