Regulation |
DGUV V 17 (before BGV C1), DIN EN 17206 |
SIL Level |
SIL 3 ready |
SIL3 |
Hoist Capacity in kg on Ropes |
up to 500 |
500 kg – 1,6 m/s
300 kg – 2,4 m/s |
Breaking Strength of Recommanded Rope |
66 kN |
Max. Travel in m |
40 |
Max. Speed in m/s |
up to 2,4 m/s depending on control |
1,8 m/sec ≈ 49 Hz , 2,4 m / sec ≈ 65
Hz |
Variable Speed |
yes, depending on control |
yes |
Duty Cylce |
75% / 50 Hz |
Noise Level |
approx. 49 dBA |
No. of Drops* |
1 |
Load Bearing Line |
rope, 8,6mm (not included) |
Load Carrying Device |
Swifel eyelet with death load included |
Type of Material – Chassis |
aluminium |
Chassis Colour |
black |
Type of Material – Cover |
steel / aluminium |
Cover Colour |
black |
Safety System |
2 independent theatre breakes (Mayr) |
Stop categories
|
|
Deceleration in case of Power Supply Failure – CAT 0
– in m/s²: |
7,8 |
Deceleration in Case of Response of Safety Function
– CAT 1 – in m/s²: |
max. 3 m/sec² depending on control adjustment |
max. 3 |
Gear Box Type |
TM TWE 08 |
Gear Box Design |
worm |
Gearbox Safety |
2 independent theatre brakes (Mayr) |
Motor Type |
asynchronous motor, 4 pol |
Motor Performance in kW |
2 x 4 kW motor = 8 kW |
Motor Properties, pro motor |
1380 rpm, 400 V , 8,97 A, cos ϕ 0,84 |
Limit Switch |
4 track (Stromag) DGUV V17 (2 x operational limits + 2 x absolute limits) |
Encoder 1 |
Absolut Encoder, for SIL 3 , SSI , 8192×4096 steps, gray code, Incremental Encoder TTL , 2048 Inc, mounted on
motor shaft supply voltage: 24 V DC |
Encoder 2
|
Absolut Encoder, for SIL 3 , SSI , 8192×4096 steps, gray code, Incremental Encoder TTL , 2048 Inc, mounted on
motor shaft supply voltage: 24 V DC |
Load Sensing (total load) |
load cell | 4-20 mA | SIL3 |
Type of Hoist Control |
not supplied |
ASM GENESIS SIL 3 |
Position of Hoist Control |
not supplied |
external, ASM power pack |
Control Equipment |
none |
GENESIS SIL3 power pack 15 kW with ASM TWINCORE SIL3 axis card, E-stop management and frequency inverter (16 kHz) |
Cable Interface |
ASM standard connector interface (Harting) incl. wiring scheme |
ASM standard connector interface (Harting) between hoist and power pack |
Main / Motor Supply |
U1 / V1 / W1 / PE (400 V 50/60 Hz) |
3 PH / N / PE (400 V 50/60 Hz) |
Power Cable |
not supplied |
1,8 m | CEE 5 PIN-16 A |
Dimensions (without external PowerPack) in mm, H x W x D |
778 x 1080 x 630 in storing position |
|
778 x 1600 x 630 in operation position |
Weight (without external Power Pack, without Ropes) in kg |
ca. 280 |
Including |
basic mounting brackets (L) and fixing equipment |
quick links for rope attachment |
|
1,5 m power cable with CEE 16 A, 5 pin plug |
|
documentation |