ASM STEEL BAND FAMILY JR DUAL BAND

The P 250 JR/ P 500 JR steel band point hoist range is equipped with two steel bands, which ensures a evenly balancing of the load. This makes the hoist especially suitable for attaching line arrays or other loudspeaker systems. The basic models are equipped with a special ASM gearbox, which does not require brakes. The dynamically self-locking gear stops the load gently and reliably even in the event of a power failure. The hoist features a gearbox with a safety catch, which sets a superior safety standard in the market.

The P 250 JR safely moves loads of up to 250 kg with a speed of 0.2 m/s.  This P 250 JR hoist uses two steel bands of 30 x 0,4 mm as load bearing lines.

The P 500 JR safely moves loads of up to 500 kg with a speed of 0.1 m/s.  This P 500 JR hoist uses two steel bands of 45 x 0,4 mm as load bearing lines.

The P 250 JR/ P 500 JR point hoists are designed in strict conformity with the DGUV V17 and EN 17206 regulations and are designed to allow performing flying of people.

The P 250 JR/ P 500 JR point hoists are made to be SIL 3 ready and can be coupled with a SIL3 control, such as ASM GENESIS SIL3 control.

• Mount under an I-beam, or vertically on a truss, or within a truss, self-climbing hoist
• Durable load bearing lines, two steel bands
• Silent and accurate operation
• The hoist features gearboxes with a safety catch, which sets a superior safety standard in the market
• Load carrying device by means of tear proof tested eyelet
• Optimal capacity to own weight ratio
• Rotation-proof operation of the load possible
• The hoist is especially suitable for attaching line arrays or other loudspeaker systems
• Use where smooth deceleration of the load is needed, even in the event of a power failure
• Control possibilities include 24V or full synchronous ASM GENESIS control